Netgear Configuration Manager _best_ Info

copy running-config startup-config Copies the currently active configuration (in RAM) to non-volatile flash memory.

Since "Netgear Configuration Manager" can refer to the web-based GUI for backing up/restoring configs or the CLI for managed switches, here is a you might use via CLI (telnet/SSH) on a Netgear M-Series or S-Series managed switch to save and manage configurations. Piece: Save Running-Config to Startup-Config (CLI) This is the most critical command to ensure your changes persist after a reboot. netgear configuration manager

copy startup-config tftp://192.168.1.100/switch_backup.cfg (Replace 192.168.1.100 with your TFTP server IP) If you need to clear all current configuration (often done before re-deployment): copy startup-config tftp://192

It sounds like you're looking for a specific configuration snippet or command related to (often part of Netgear ProSAFE or NETGEAR Business devices, like switches, access points, or routers). Please wait

Copy running configuration to startup configuration. This operation may take a few minutes. Please wait... ............... Configuration Copied Successfully. To back up your switch configuration to a TFTP server (useful for disaster recovery):