Canon G2010 Resetter (Fully Tested)

A: Very difficult. Almost all reset tools are Windows-only. Some advanced users use virtual machines or Wine on Mac/Linux, but it’s not reliable.

Reset once to finish urgent prints, then plan to install an external waste ink tank or replace the pads within a month. Have you successfully reset your Canon G2010? Share your experience or ask questions in the comments below! canon g2010 resetter

A: Typically 2–3 times before the physical pad must be replaced. After that, ink will leak. Final Verdict The Canon G2010 resetter is a lifesaver for getting your printer working again after a false “ink absorber full” error. Use it carefully, always scan the tool for viruses, and don’t ignore the physical maintenance. A: Very difficult

A: Only if the physical pad is already full. Reset then monitor for leaks. Reset once to finish urgent prints, then plan

The solution? A tool.

If you own a Canon Pixma G2010 (part of the popular MegaTank series), you’ve probably encountered the dreaded “Ink Absorber Full” or “5B00” error message. This usually appears after years of heavy use, and it stops you from printing entirely.

| If your printer... | Action | |-------------------|--------| | Is < 2 years old, light use | Reset only – pad is likely fine. | | Is > 2 years old, heavy use | Open printer and replace/clean absorber pads (or install an external waste ink tank). | | Leaks ink after reset | Immediately stop using, clean internal pads, or take to a repair shop. |